How our Pokémon card scanner recognises a card
Point your phone at a Pokémon card and the Vault tells you which card it is and what it's worth. There's no barcode on a Pokémon card to read, so the scanner has to recognise the picture. Here's how it does that, and how to get the best scans.
Step 1: find the card
The scanner looks for the card's outline in the camera picture, straightens it and crops it to the card, even when you hold it at a slight angle or a bit too close. When the card fills more than the frame, it tells you to move back.
Step 2: make a fingerprint
From the cropped card it measures 762 numbers: the light and dark pattern across the whole card, the artwork box in detail, and the colours. Those 762 numbers are squeezed into 128 small numbers, a fingerprint that captures what makes this card look like itself.
Step 3: compare it with every card
We made the same fingerprint for every card in our database, 21,428 cards from the earliest sets to the newest. All of them fit in a 3.7 MB file that your phone downloads once. The scanner compares your card's fingerprint with all of them in a fraction of a second, then takes the closest 25 or so and checks them again against the real card images.
Step 4: read the text when it's close
Some cards look almost the same: the same artwork in another set, or a reprint with a new number. When the best match isn't clearly ahead, the scanner reads the card's name and number with text recognition and uses them to settle it. It only says "Match found" when it's sure; otherwise it calls its answer a best guess and asks you to check it.
How well it works
In our test with simulated phone photos, the scanner found the right card 96% of the time at a normal distance and 98% when the card was held too close, and it never showed "Match found" for the wrong card. Real phones vary, which is why it always lets you confirm.
Your camera, your phone
The recognition runs on your own phone. Your camera picture is never uploaded: only the card index, the card images and, when it's needed, the text-reading tool are downloaded to your phone.
Tips for better scans
- Fill the frame. Line the card up with the corners on screen. Not too close: a card that spills over the frame scans worse than one with a little space around it.
- Kill the glare. Holo cards and sleeves reflect light. Tilt the card a little until the shine is gone.
- Use good light. Daylight or an even room light beats a single lamp. On phones that support it, the scanner has a torch button for dark rooms.
- Tap to focus if the picture looks soft, or use the Photo button to scan a picture you took with your camera app.
- One card at a time, on a plain background.
The scanner knows English-language cards. Japanese and Chinese cards are on our list.